PeggedBoard v1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My WIP version of a 3d print friendly peg board alternative.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
My WIP version of a 3d print friendly peg board alternative. It uses screw-in pegs with tapered heads and slots in the attachments. The pegs are spaced 25mm apart using #8 or #6 countersunk wood screws at least 1/2" long or any screw that sticks out from the peg less then 1mm.
Update v1.1 - Double Standards: Added pegs for standard 3/16” pegboard with 1” spacing that presses in and lock with a M3x10mm countersunk screw and redesigned the hangers to a 25.2mm slot spacing to fit better on both. I also added a keyhole hanger that can be printed in any (basic) orientation. The basic peg is unchanged and the original hangers will fit on a 1” spacing as they were designed with a good bit of tolerance on the peg position, the redesign is to equalize the stacked position error on wider (5-6+) hangers. The redesign also allowed me to split the pegs and different width hangers into separate files that can be “saved as” for new holders.
STLs included so far: Pegs:
- Basic Peg
- Long peg - Extra .5mm peg length for easy slip fits.
- 1x2 Pegs - Add a quick hanger anywhere
- 3x5 Pegs - A mini PeggedBoard with 3 rows of 5 pegs 50 mm apart v1.1:
- push-in screw lock peg 0.25” and 0.27”
Mounts:
- 2w & 3w blanks
- 2 square hooks (width x opening)
- Small hammer holder
- Screwdriver holders with holes
- Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type)
- 6x small screwdriver holder
- Paper towel roll holder 40mm dia.
- 2x2 Gridfinity baseplate New(v1.1): v1.0:
- 1w Mini screwdriver holder with slot and counterbore (width - c-bore dia. x c-bore depth/type)
- Black & Decker cordless drill / 1.5AH Max20V battery holder v1.1:
- 2w & 3w slotted hanger blanks
- 2w & 3w keyhole hanger blanks
- Screwdriver holders with slots and counterbores (width - c-bore dia. x c-bore depth/type)
STEP files, a drawing of the peg and groove, and F360 archive are included for making your own holders. v1.1 new F360 archive files for the peg, hangers, and screwdriver holder.
Enjoy
Category: Tool Holders & Boxes