1 / 3
tenlog d3-pro extruder cover - dual side fan duct/shroud for stock fans + optional microprobe mount (hictop d3 hero / reayou idex tl-d3) — image 1
1 / 3

tenlog d3-pro extruder cover - dual side fan duct/shroud for stock fans + optional microprobe mount (hictop d3 hero / reayou idex tl-d3)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

⠀

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use https://github.com/klack/LuxuriMarlin/wiki/BL-Touch as a reference).

BOM:

  • 8 m3 square nuts (5.43x5.43x1.9)

  • 4 m3 bolts 18mm for 4010 heatsink fan

  • stock nuts and bolts for 4010 nozzle fan

  • stock bolts for extruder cover

Optional (microprobe mount):

  • 2 m3 nuts

  • 2 m3 bolts 8-10mm

  • 1 m3 additional bolt 18mm for 4010 heatsink fan

  • 1 m3 additional square nut (5.43x5.43x1.9) for 4010 heatsink fan

  • probe offset: x=0, y=50.75

Optional (4010 heatsink fan shroud / duct):

  • It's tricky to install. You'll need to mount it onto the heatsink first, install the extruder cover with the heatsink fan unscrewed, and only then screw the heatsink fan back on with the shroud.

  • Also you can safely lower heatsink fan speed to 0.65 to make it more quiet (even without this shroud installed)

Print recommendations:

  • arachne wall generator

  • 0.2mm layer height

  • 0.4mm for outer and inner walls

  • 2 wall loops, 7% honeycomb infill

  • supports are optional but recommended

  • print orientation -- as placed:

Supports:

Input shaping graphs:

Tags