Counting matching models…
Creality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers…
Creality Ender 3 users please read the last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when…
This is a mounting system to use two BIQU H2's with a Tenlog TL-D3 Pro or Hictop D3 Hero. The E2 adjustment concept came from MaracMB's design for the Hemera mount. I used vampyrex13's (which turned out to be…
This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro. This requires no screws or other hardware to attach it to the machine as it just clips securely on to the extruder. I bought a BLTouch…
mon compte Art3Dchoix => https://www.instagram.com/art3dchoix/ Pour tenlog tl-d3 pro Here is a handle to pull the bed of the TENLOG TL-D3-Pro printer You can unscrew the wheels under the platform, lift it and insert it between the…
This is a sliding mount for the auto bed leveling sensor type SN04-N used on some Prusa i3 3D printers. This sliding mount is much easier to adjust than fixed mounts and is easy to make from commonly available screws. This mount can be…
I've swapped out the original extuders (for the Hictop Titans) on my Tenlog TL-D3 Printer because the extruders that come with it are too heavy and not much good for sustained high temperature printing.…
When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows you to access the port through a cooling vent on the right-front. Allows you to use a common microSD to SD card adapter…
WORK IN PROGRESS bmg + v6 extruder for Tenlog D3 Pro with Hictop mount plate link to onshape work: https://cad.onshape.com/documents/795ed0e8f7593bda6683f376/w/3a61c6ec6cc35afb6e159085/e/d0a1e93d030008aedf0c4812 Print Settings Printer:…
Now sure how useful this will be. I inherited an old HICTOP Aurora 3D printer a while ago. I had designed this power supply cover which worked great. Just before I got the printer working my dog tripped on the power wire and slammed the…
I created this case to allow taping Aluminum foil duct tape to the inside perimeter to assist in reducing EFI noise. An for what all case covers are for to keep the wires safe an secure making this cheap 3D Printer look more professional.
This is a replacement part for the HicTop 3DP11 and 3DP12 printers, I have included my support for the Raspberry Pi Camera Wide angle (130) from Amazon . I wanted to add a fixed case for this wide angle camera, putting it on the X-Idler…
For use with MMendel's 2-in-1 UltraCompact Hictop Bowden Mount . This is an alternate part for holding the hot end in place without the built-in fan mount, for using the stock E3D injection molded fan mount or another fan design such as…
To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use…
Got tired of the wires disconnecting from the switches, so I remixed Adranovik's left XZ axis to remove the endstop tab so I could use the bigtreetech endstops. Haven't printed it yet, but will be shortly and will add a picture. Category:…
Cover for the stock Ramps 1.3 board on the Hictop i3 clone (2015 model). Print Settings Printer: Hictop i3 clone Rafts: Doesn't Matter Supports: Yes Resolution: 300u or to taste Infill: 20% or higher Category: 3D Printer Accessories
To get the BIQU Microprobe working, you'll need to switch your printer to Klipper (recommended, I've attached my printer.cfg as a reference), or know how to properly recompile Marlin (I have no experience with this, but you can use…
A simple wall mount holder for a scraper/3d print removal tool. You can mount it using common wood screws. This was designed with Tinkercad and a caliper by measuring the HICTOP 3d Print Removal Tool handle. Print Settings Printer:…
Just a remix of this great case to add brackets that allow you to bolt it to 2020 rail. If I were to do this again I would add a slot beside the USB port.. my board had a card reader there so I wound up dremelling that part of the case…
I'm always looking for easy improvements to my Prusa i3. I disliked having to reach in back to disconnect the USB cable so I moved it to the front using that short cable that comes with the printer, an adapter, and this printed adapter…
Simple remix that removes the mount for an inductive sensor and adds a mount for a BLTouch. Works with almost any i3 setup with bearing blocks. Link to the cooling fan setup: http://www.thingiverse.com/thing:1746358 This mount is featured…
The original by jhahn fit fixed the problem that I had with every other bed levelling nut design for the HICTOP i3 (3DP-11), which was that they would hit the Y-axis rod mounts, especially at the rear of the printer. I made one small…
This is a simple pen holder to use a Hictop ender as a plotter. Print Settings Printer: Hictop Ender Supports: Yes Resolution: 0.28 Notes: Support only from build plate is enough. Category: 3D Printer Accessories
A simple bracket that reaches over the top of the X gantry to allow mounting of a laser module. Mount the laser to the bracket, then mount the bracket to the printer. Make sure it doesn't collide with your printer's geometry. Print…
This isn't something to print it's an STL representation of an HicTop 3DP12 bed to go into the machine properties in Simplify 3D (e.g. Options -> Machine -> Add, select this STL). If you want to customise for your own printer, it's…
This is a cover for the back of the HicTop Prusa i3 display. The original file was for the thin controller, 32mm in my case, I've added a 40mm one for the larger types of controller boards It's available to copy/edit yourself on OnShape…
My extruder lever broke on my D3Hero. I heard this is common, but I wanted to get the printer up and running ASAP so I drew this up. It's a quickie but I think it'll work fine, I'm already on my first print! :-P I had a Temperature Error…
My remix for MikeFrancies' flexistruder: https://www.thingiverse.com/thing:1099016 Most important adaptations: The bearing has a bit more clearance inside the lever for smooth rotation The dimensions are adapted to work perfectly with the…
A mount for the BIQU H2 Extruder on a Hictop 3DP-08 acrylic I3 clone Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 55% Filament: Overture ABS Grey Category: 3D Printer Parts
Remodeled from scratch because the module that I remixed from didn't slice correctly in Simplify 3D. Rounded corners at the top to prevent areas where the belt might catch. Also narrowed the gap where the teeth are by 0.1mm to give a…
I'm currently trying out a Bowden extruder on my. Hictop aluminium and previously the hot end and fan cables were tied to the stepper motor cable and seemed pretty solid. However since the stepper motor is no longer on the carriage, the…
I've updated this a little with the edges radiused which should reduce belt rubbing, and for anyone wanting to modify this themselves I'm including the original 123D Design files. This was my first attempt at anything with CAD, I have one…
Small spool holder for the Hictop prusa. Fits small 500-750 grams spools Print instructions Category: 3D Printer Accessories Summary Small spool holder for the Hictop prusa. Fits small 500-750 grams spools
A mount to attach the popular “Articulating Raspberry Pi Camera Mount” to to the Z-Axis of the Hictop D3 Hero (aka Tenlog D3 Pro). It attaches to the back of the left Z-Axis and has a slot to put the pi camera cable through. I suggest…
It's a lot easier to see how your printer is performing if you have a good light on the platform. I designed these clips to hold a 12v white LED strip by twist-locking into the rail of the printer. Because the power supply is 24v, you…
On the stock HICTOP Prusa I3 printer, the Z-axis threaded rod is supported by sticking it through a hole in an acrylic part. This is a bad idea because 1) HICTOP's tolerances on these parts are not very good and 2) the rod will wobble and…
On the HICTOP Prusa I3 printer, the Y-Axis rods are supported by a couple of acrylic blocks. The tolerances on the blocks are very poor, causing then to stress the rod (and the bearings) or to shatter (as mine did). You can easily replace…
