1 / 4
HICTOP Prusa I3 Z-Axis Bearing — image 1
1 / 4

HICTOP Prusa I3 Z-Axis Bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

On the stock HICTOP Prusa I3 printer, the Z-axis threaded rod is supported by sticking it through a hole in an acrylic…

Rating
0 / 5
Likes
2
Downloads
43
Makes
0
Views
667
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

On the stock HICTOP Prusa I3 printer, the Z-axis threaded rod is supported by sticking it through a hole in an acrylic part. This is a bad idea because 1) HICTOP's tolerances on these parts are not very good and 2) the rod will wobble and wear against the acrylic.

If yours shatters (like mine did) and you just want to replace it, you can print this replacement part.

HOWEVER, since you are doing this anyway, why not do it right? You can replace this part with one that uses an inexpensive 8mm bearing (available for cheap on Ebay) and never have to think about it again. The preferred bearings are type 608ZZ.

Print instructions

This part was designed in SketchUp

Tags