1 / 2
Mount for a BLTouch for the Hictop D3 Hero/Tenlog D3Pro with the early Extruders — image 1
1 / 2

Mount for a BLTouch for the Hictop D3 Hero/Tenlog D3Pro with the early Extruders

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro.

Rating
0 / 5
Likes
4
Downloads
63
Makes
0
Views
688
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro.  

This requires no screws or other hardware to attach it to the machine as it just clips securely on to the extruder.  I bought a BLTouch for an Ender 3 that came with the cable and the two screws to attach the BLTouch to the mount.  

The BLTouch can be used with these machines by using the LuxURI firmware available on GitHub (https://github.com/klack/marlin).

If you use the wiring that comes with the Ender 3 version you can modify the installation instructions from LuxURI wiki (https://github.com/klack/marlin/wiki/BL-Touch)

BLTouch WireRight Z-Stop WireLeft Z-Stop Wire
WhiteWhite 
BlackRed 
YellowGreen 
Red White
Blue Green

Your mileage may vary but the offsets on my printer are:
X: -27.5
Y: -44.5
Z: -2.02 (This WILL vary on your printer.)

I recommend printing with PETG or ABS to get a little bit of flexibility to clip it on and to withstand higher temps from the heated bed. 

Tags