Mount for a BLTouch for the Hictop D3 Hero/Tenlog D3Pro with the early Extruders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro.
This requires no screws or other hardware to attach it to the machine as it just clips securely on to the extruder. I bought a BLTouch for an Ender 3 that came with the cable and the two screws to attach the BLTouch to the mount.
The BLTouch can be used with these machines by using the LuxURI firmware available on GitHub (https://github.com/klack/marlin).
If you use the wiring that comes with the Ender 3 version you can modify the installation instructions from LuxURI wiki (https://github.com/klack/marlin/wiki/BL-Touch)
| BLTouch Wire | Right Z-Stop Wire | Left Z-Stop Wire |
| White | White | |
| Black | Red | |
| Yellow | Green | |
| Red | White | |
| Blue | Green |
Your mileage may vary but the offsets on my printer are:
X: -27.5
Y: -44.5
Z: -2.02 (This WILL vary on your printer.)
I recommend printing with PETG or ABS to get a little bit of flexibility to clip it on and to withstand higher temps from the heated bed.