E3D V6 HICTOP Titan Extruder Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've swapped out the original extuders (for the Hictop Titans) on my Tenlog TL-D3 Printer because the extruders that…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I've swapped out the original extuders (for the Hictop Titans) on my Tenlog TL-D3 Printer because the extruders that come with it are too heavy and not much good for sustained high temperature printing.
https://www.amazon.co.uk/dp/B087GLGYG7?psc=1&ref=ppx_pop_dt_b_product_details
I then upgraded the Titans to E3D V6 hotends.
This is a drop in mount and fan duct.for an E3D V6 hot end for the Hictop Ttitan extruders.
I printed everything in PETG (Although the fan duct should really be printed in ABS if you are going to print hot stuff like PETG. That said, it hasn't melted so far!)
Print Settings
Printer:
Tenlog TL-D3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Dutch Filament PETG
Notes:
This will print without supports but the M3 nut holes might need a bit of post processing depending on how well your printer does bridges.
Category: 3D Printer Extruders