Paulimot 300 mm Messschieber Schieblehre caliper Extention
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.45 – €2.99 net (excluding VAT)
For file: Pasulimot_Caliper_Extention_0.2mm_PLA_MK3S_2h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.72 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ich habe für meinen Paulimot Messchieber 300 mm ein paar Erweiterungen gebraucht, um tiefer in einer Box messen zu…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 114
- Makes
- 0
- Views
- 806
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Ich habe für meinen Paulimot Messchieber 300 mm ein paar Erweiterungen gebraucht, um tiefer in einer Box messen zu können. Also habe ich mir diese Erweiterungen konstruiert.
Sicher sind diese nicht so genau und da es Kunststoff ist, lassen sie sich verbiegen. Aber um Abmessungen ohne Krafteinwirkung auf 1 mm genau schätzen zu können, reichen sie mir aus.
Ob sie auch für andere Messschieber passen, kann ich leider nicht sagen. Für 150 mm Messschieber, könnten sie etwas zu groß sein.
I needed a few extensions for my Paulimot caliper 300 mm in order to be able to measure deeper in a box. So I constructed these extensions.
Of course, these are not that accurate and since it is plastic, they can be bent. But to be able to estimate dimensions without force to within 1 mm, they are enough for me.
Unfortunately, I can't say whether they also fit other calipers. For 150 mm calipers, they might be a bit too big.
https://www.amazon.de/gp/product/B00KH2U3ZS
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament: any PLA any
Notes:
I use 0,4 mm nozzle an set the outer perimeter width to 0,52 mm
print with 3 perimeters
Category: Hand Tools