MFJ-267 Meter Retention Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.85 – €1.04 net (excluding VAT)
For file: MFJ-267_Meter_Bracket_W6DTW_v5_0.2mm_PETG_MK3S_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.95 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replaces a broken meter retention bracket on the MFJ-267 Watt Meter and Dummy Load
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The meter on an MFJ-267 Watt Meter and Dummy Load is held in place by a custom nylon retention bracket. If the unit is dropped, the bracket can break. This part replaces the OEM retention bracket.
My repair part allows the reuse of the factory screws if printed (in PrusaSlicer) with a 10 mm solid bottom layer as follows:
Horizontal shells
Minimum shell thickness:
Bottom: 10 mmAlternatively, you could try increasing Perimeters.
Install the bracket with the embossed arrow pointing at the meter's back side.