Pro Micro LoRa kit case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pro Micro nRF52840 + Pro Micro SX1262 LoRa kit case
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printed enclosure for a LoRa/Meshtastic/Meshcore node using the Pro Micro nRF52840 + Pro Micro SX1262 kit.
Shoutout to quant86 from Thingiverse, from which I remixed the main model.
Components
Board: Pro Micro nRF52840 + Pro Micro SX1262 kit (search “promicro nrf52840 sx1262” on AliExpress)
Battery: 84 × 50 × 3 mm battery (~1500 mAh). A slightly thicker battery should fit.
Screws: 4× M2, 10–15 mm length (or other small screws). Small wood screws should also work if they fit the holes.
Assembly note
When installing the board, first align the Type‑C connector with the corresponding hole in the enclosure, then lower the board onto the mounting posts.
I’m also sharing the FreeCAD project file so anyone can remix it or improve the design.