AD5M side mounted filemant spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament spool holder for the Flashforge Adventurer 5M
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Filament spool holder that mounts to the side of the Flashforge AD5M printer.
The holder is using four of the frame screw holes, replacing the original screws.
When mirroring the main part in the slicer it can also be mounted on the other side of the printer.
Print with a higher than usual wall-count and lots of infill to prevent drooping.
Filament spools can be quite heavy.
Hardware requried:
4x m4x16 screws (the original ones are not long enough)
2x 608 ball bearings (8x22x7mm)
1x M8 threaded rod, cut to length for the spool roller
2x M8 nuts, preferrably self-locking
The "tube mount" part can be screwed into one of the empty frame screwholes one the back of the printer for holding a longer PTFE tube directly below the spool holder.