Extra large base for Modular 3D Printed Floor Lamp by GregDeanMann
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a larger base with space for electronics under the base, some venting, and an inset for the endcap.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This is a larger replacement base for the one provided with the paid design available here. In addition to the extra space there are support brackets and venting. A sacrificial support object is included if you're printing with PETG and PLA supports.
Note: The base has a 274mm diameter, so you'll need a larger printer.
Printing Instructions:
Don't add too many vertical shells, or this will impact the inset on the top object. I used the standard prusa structural settings with 50% infill to increase strength. You may want to add supports under the power supply port as well.
I strongly recommend avoiding PLA if you'll be storing a power supply or other electronics in the base.
I recommend setting vertical shell perimeters no higher than 2 - higher values may result in the top cutout getting bled into and the end-cap not fitting.
Related models:
You may also find the endcap reinforcement or T8 LED strip models helpful.