Trend CRT/MK3 Router Table to Parkside PPWD 30 Vacuum Adapter (57mm to 35mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made-to-measure dust adapter: Trend CRT/MK3 router table port (58.3mm) to Parkside PPWD30 vacuum hose (35mm).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Dust-extraction adapter that connects a Trend CRT/MK3 (CRT/MK3/EURO) router table's fence port to a Parkside PPWD 30 wet/dry workshop vacuum hose.
Designed to real caliper measurements, not nominal specs:
Trend port: 58.3 mm ID / 62 mm OD. The Ø58.0 spigot slides into the port with a light friction fit, and a Ø66 flange seats against the 62 mm rim so it can't push in too far.
- Parkside hose: 35 mm OD / 30.5 mm ID. The hose end plugs into the Ø35.4 socket.
- Smooth Ø53 to Ø35 internal taper keeps airflow up. Total length 82 mm, ~2.5 mm walls.
Should also fit any tool with an ~57-58 mm port (e.g. Makita MLT100) and any standard 35 mm workshop-vac hose.
FILES
STL and 3MF: ready to slice and print.
- SCAD: parametric OpenSCAD source. If the fit is tight or loose, change trend_spigot_od or park_socket_id by 0.2-0.3 mm and re-export. No need to reprint blind.
PRINT SETTINGS
Orientation: stand upright on the wide (Trend) end. No supports needed.
- Material: PETG or ABS recommended (heat/vibration near a router); PLA is fine for a test fit.
- 3-4 walls, 20-30% infill, 0.2 mm layers.
- Layer lines running around the tube actually help the seal.
