Trend CRT/MK3 Router Table to Parkside PPWD 30 Vacuum Adapter (57mm to 35mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made-to-measure dust adapter: Trend CRT/MK3 router table port (58.3mm) to Parkside PPWD30 vacuum hose (35mm).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Dust-extraction adapter that connects a Trend CRT/MK3 (CRT/MK3/EURO) router table's fence port to a Parkside PPWD 30 wet/dry workshop vacuum hose.
Designed to real caliper measurements, not nominal specs:
Trend port: 58.3 mm ID / 62 mm OD. The Ø58.0 spigot slides into the port with a light friction fit, and a Ø66 flange seats against the 62 mm rim so it can't push in too far.
- Parkside hose: 35 mm OD / 30.5 mm ID. The hose end plugs into the Ø35.4 socket.
- Smooth Ø53 to Ø35 internal taper keeps airflow up. Total length 82 mm, ~2.5 mm walls.
Should also fit any tool with an ~57-58 mm port (e.g. Makita MLT100) and any standard 35 mm workshop-vac hose.
FILES
STL and 3MF: ready to slice and print.
- SCAD: parametric OpenSCAD source. If the fit is tight or loose, change trend_spigot_od or park_socket_id by 0.2-0.3 mm and re-export. No need to reprint blind.
PRINT SETTINGS
Orientation: stand upright on the wide (Trend) end. No supports needed.
- Material: PETG or ABS recommended (heat/vibration near a router); PLA is fine for a test fit.
- 3-4 walls, 20-30% infill, 0.2 mm layers.
- Layer lines running around the tube actually help the seal.
