Z cross shrinkage calibration tool - Tall, sturdy, fast & small <7grams filament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
modest z shrinkage test - for calibrating z dimensional accuracy
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Z shrinkage calibration
the other tall thin cross model on here had a tendancy to wobble the taller it got which threw off the reading
caded this up to help me calibrate Z shrinkage for my gantry parts
can be scaled any direction, taller or shorter too
I did 100mm in z to account for caliper inaccuracy
shrinkage along a axis is best measured for over a larger span or scale than the part you are printing
mine shrank to 99.22 (pc-cf, 0.6 nozzle .24 layer, 70c chamber, 110 bed)
i have also included a model with steps in it for calipers at different increments of 10mm so you can still get readings even if it fails up top.
use a nice brim and slow print speed way way down and or increase minimum layer time (for this print im using qidi q2 at under 30% speed)
if still wobbles, widen by % along x and y and slow down speed even more - you can also just place a cube or rectangle at the base in the slicer for extra support
if you are printing high temp filaments let the chamber and bed fully cool down before removing part from printer as this may affect reading.
- theres alot of different factors at play, what filament you are using, your printer, temps etc however once you understand it and tune it right it serves as a great cheap repeatable tool for future filaments.
has some corners so you can dial in your pa for particular tight corners or complex smaller parts too!
ideally 0.4 to 0.6 nozzle
