Destroyed modern appartment block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large model of a modern building for your tabletop
- Rating
- 0 / 5
- Likes
- 4
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Standard Digital File License
Hello,
The model is provided in 28mm (1/56) but it can be easily adapted to your scale :
- to 6mm (1/280) : x20%
- to 10mm (1/200) : x35%
- to 15mm (1/100) : x56%
- to 20mm (1/72) : x78%
- to 25mm (1/64) : x88%
- to 1/48 : x117%
- to 1/35 : x160%
Need help? You can use our automated calculator, which includes many scales and games to assist you, by clicking here.
The model fits on any printer with a minimum build area of 190x190mm (if needed, additional cuts can be made easily and we'll be happy to help). The model comes in 13 separate parts.
In partnership with the designer 3D Fortress. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you.
All our articles on our website : www.hartolia-miniatures.fr
You're welcome to contact us if you need any help or information !
Follow us :
| Patreon |
| Kickstarter |
| Facebook |
| Instagram |
Use these FDM parameters as a reliable baseline for your prints: these settings are flexible, adapt them to your printer, material, or project.
Layer height: 0.2mm (selecting 0.16mm or 0.28mm provides an optimal hardware match for clean finishes).
Wall perimeters: 3 (for a solid model).
Top/Bottom layers: at least 5 (for completely opaque and sturdy flat sections).
Infill: Gyroid, 8%-10% density (great balance between speed and resistance for general use). Try switching to Adaptive Infill on larger models to reduce material usage.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (90g of the 1kg total filament is dedicated to support structures).
Note: Default 'standard profiles' are a great way to start for easy and successful prints for beginners.
The model requires ~1kg of filament in total. This high-volume component requires over 50 hours to print. A dedicated project for makers looking for an impressive centerpiece! (average printing time is 3h50 per part, ranging from a few minutes to 11h50 maximum). Data are based on a print in 1:56 (28mm scale) on our Prusa MK4S (10% infill, 0.2mm layers), may vary depending on your printer and settings.