Prusa Core One Lid MagRivets - Improvements
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am a fan of the Prusa Core One Lid MagRivets by muddymaker, but I wanted a few quality of life improvements.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 1
- Views
- 120
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I reverse-engineered the model from the original STL and adjusted several dimensions for a more secure fit. The magnet hole is now snug enough to hold the magnet firmly while still allowing it to be pressed in by hand.
I also widened and lengthened the pin that engages with the rivet holes. It remains easy to install but provides a more secure hold than the original.
This remix includes versions for both 8 × 2 mm and 8 × 3 mm round magnets, provided in STEP and STL formats.
My print settings (YMMV):
0.2 mm layer height
100% infill
Nip/Tuck seams ( from preFlight Slicer)