Box for the top rear camera Chevrolet Bolt | V1.1, redesigned
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Installation of a rear upper camera on a car without replacing the lower part of the upper spoiler.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
It is possible to modify it for other types of cameras. A standard camera washer is present. Installed on the Chevrolet Bolt EUV after restoration. The factory camera and its washer were mounted in the box. The box is glued with double-sided tape. When gluing, you need to find a position in which the box will not interfere with the mounting of the lower part of the spoiler (it will not rest against the glass). To route the wires and the washer hose in the lower part of the spoiler, I drilled a hole with a diameter of 20 mm. For internal mounting of the camera, I used hot melt adhesive. The washer nozzle is mounted on 3 mm screws. Nuts with a diameter of 4.2 mm are inserted into the holes, but you can use screws. The design is rigid and, in my opinion, fits well into the car interior.
ATTENTION! The camera file has been changed. The rear part of the box has been modified. The box is installed along the outer cut of the black part of the spoiler. The installation location should not interfere with the movement of the windshield wiper and washer.
Print with ASA plastic. If necessary, you can paint. Filling 20-30%. Walls 4-5. According to your feedback, the box can be modified to fit other sizes of internal elements.
See my other models.