SV08 Max Mainboard Relocation Bracket for HDMI Touchscreen Internal Connection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket moves the SV08 Max mainboard back and to the right/rear to make room for the HDMI and USB cables
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This bracket moves the SV08 Max mainboard away from the side of the printer and towards the rear to make room for the HDMI and USB cables from the HDMI screen mounted in the default location to plug in without sticking out the side of the printer. Also includes a panel to cover the holes in the side of the printer for the plugs.
I printed this in ASA and then PET-CF just because that is what I have. Not sure what the temps might get to in the electronics box but PETG or PLA might be OK but are untested.
I just printed with default Voron settings
0.2 Layer Height / 0.4 Line Width / 40% gyroid infill.
I used 5 standard voron 3x4x5 heatset inserts and M3 SHCS.
For the plate for the ports on the side of the printer I just used a couple of small strips of VHB double sided tape.