Modular Rail-Mounted Cable Organizer (for 60x60 Trunking)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hide under-desk cables! A 60x60 trunking compatible holder with a zip-tie mount and a secure click-in rail system.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Designed to completely eliminate under-desk cable clutter and help you achieve a perfectly clean, modern workspace! This modular cable hider is dimensioned to fit right inside standard 60x60mm cable trunking/ducts. It secures firmly to the inside of the duct using standard plastic zip ties for a rock-solid hold.
The standout feature is the two-part sliding rail system. Using the included installation guide part, you can easily position and screw the small rail into place. Then, simply slide the main C-bracket onto the rail until you hear a satisfying "click"—letting you know it's securely locked. If you ever need to add or remove cables, just press the locking tab and slide it right off.
Recommended Print Settings:
Perimeters: A setting of 3 walls (perimeters) is highly recommended to ensure the locking tab and rail mechanism are strong enough to withstand repeated use without snapping.
Infill: 20% infill has been tested and is the sweet spot for the structural integrity of this design.
Material: PLA or PETG both work wonderfully. Slice it in OrcaSlicer and send it to your Creality K1C or similar fast printer for perfect tolerances.