Jier JR-600 compatible submersible pump to 1/2" tubing adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lost a part for my submersible pump for a fountain, so I made a replacement.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Since this is going to be submerged in water, print it with something durable. I used Prusament Lipstick Red ASA because that's what I had loaded.
The bgcode provided worked for my Prusa Core One+ printer. No supports required, but you probably need to rotate the model 90 so that it prints "up", basically as concentric circles.
The single-ringed barb goes into the flexible tubing. The other end - supposedly just shy of 8mm ID - is a friction fit over the part of the original adapter section for the Jier JR-600 submersible pump that didn't get lost. The pictures show the basic setup. It was a first-try-works print, so I didn't take a picture of the part by itself.
This is my first on-my-own model, created in FreeCAD, which I'm clearly still learning. It works for my needs.