1 / 3
Jier JR-600 compatible submersible pump to 1/2" tubing adapter — zdjęcie 1
1 / 3

Jier JR-600 compatible submersible pump to 1/2" tubing adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lost a part for my submersible pump for a fountain, so I made a replacement.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Since this is going to be submerged in water, print it with something durable. I used Prusament Lipstick Red ASA because that's what I had loaded.

The bgcode provided worked for my Prusa Core One+ printer. No supports required, but you probably need to rotate the model 90 so that it prints "up", basically as concentric circles.

The single-ringed barb goes into the flexible tubing. The other end - supposedly just shy of 8mm ID - is a friction fit over the part of the original adapter section for the Jier JR-600 submersible pump that didn't get lost. The pictures show the basic setup. It was a first-try-works print, so I didn't take a picture of the part by itself.

This is my first on-my-own model, created in FreeCAD, which I'm clearly still learning. It works for my needs.

Tagi