Mic Holder for YSK-8900
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mic mount that attaches to the back of the ysk-8900
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This mount attaches to the back of the ysk-8900 remote faceplate adapter for the ft-8900/ft-8800 and allows attachment of the microphone hanger. It is pictured with a LIDO LM-300-QR mount. It just needs the clearance on the back. It will work only with the mic on the right side since the holes on the back of the YSK-8900 are not symetrical.
It uses a 3mm machine screw and nut to attach it. I used a 16mm length, but probably should have used 10mm or 12mm.
It has holes for #8 sheet metal screws to hold on the mic hanger.
I printed in Polymaker HT-PLA-GF for use in my car. make sure to use a high temperature resistant material if it is going to be in a car or other hot environment. PLA might be okay for an air-conditioned indoor space, but even there I would choose a material that could also be used in a car, just in case the radio is moved later.