1 / 4
Corsair 7000D Individual Case Feet Extensions ( + 19mm / ~3/4in) — image 1
1 / 4

Corsair 7000D Individual Case Feet Extensions ( + 19mm / ~3/4in)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€8.30 – €10.15 net (excluding VAT)

For file: 7000DLegStand_Individual_0.4n_0.2mm_PETG_COREONEL_6h51m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €9.22 excluding VAT (range midpoint).

Weight reported by the author
177 g
Print time reported by the author
6.84 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

7000D PC case feet extenders designed to give the PSU a little more breathing room. Adds 19mm or ~3/4in more clearance.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
62
Reviews
0

Updated at source:

Model information

Category
Office
License
Standard Digital File License

PC case leg extensions designed for the Corsair 7000D case. These leg extensions lift the case 19mm or roughly 3/4in off of the floor to allow your PSU to breathe more easily.  Four total are needed to fit each leg on the case.

This also appears to fit the Corsair 750D case. More Corsair cases may be compatible.

Print Settings (Core One L)

This case with all the components in it are pretty heavy, so I increased the infill, perimeters, and top/bottom layers to be safe.

Filament: Sunlu Black PETG
Layer Height: 0.2mm
Infill: Honeycomb 30%
Perimeters: 5
Top/Bottom Layers: 10
Supports: No Supports
Orientation: On feet bottoms

Tags