1 / 4
Schwalbe Clik Valve to SKS Airchecker adapter — image 1
1 / 4

Schwalbe Clik Valve to SKS Airchecker adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a SKS Airchecker.

Rating
4.5 / 5
Likes
7
Downloads
35
Makes
1
Views
242
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a SKS Airchecker. The Schwalbe / SKS CLIK Valve SCV pump head adapter is also required: https://www.sks-germany.com/en/Products/Pumps/CLIK-TEC-Adapter-for-Pump-Heads.htm?a=article&ProdNr=12068&p=1008

To install it, the darker plastic ring around the SKS Airchecker's coupling must first be removed from the Schrader valve side. It's held in place just by a bayonet mount. A small counter-clockwise turn is all it takes, then the ring can be pulled off.

The upper part of the Schwalbe / SKS CLIK Valve SCV tire pump head adapter (rubber-coated) can be easily unscrewed from the lower part with the Schrader adapter (threaded part). When assembling the printed adapter, it is important to reinsert the small rubber seal which is located inside!

I printed the adapter on my Core One with a layer height of 0.1 mm and it works without issues up to 4 bar. I don't need any more pressure.

For information: The thread of the Schwalbe / SKS CLIK Valve head is 0.5 in x 1 mm 😉.

Tags