1 / 4
Schwalbe Clik Valve to SKS Airchecker adapter — zdjęcie 1
1 / 4

Schwalbe Clik Valve to SKS Airchecker adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a SKS Airchecker.

Ocena
4,5 / 5
Polubienia
7
Pobrania
35
Wydruki
1
Wyświetlenia
229
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a SKS Airchecker. The Schwalbe / SKS CLIK Valve SCV pump head adapter is also required: https://www.sks-germany.com/en/Products/Pumps/CLIK-TEC-Adapter-for-Pump-Heads.htm?a=article&ProdNr=12068&p=1008

To install it, the darker plastic ring around the SKS Airchecker's coupling must first be removed from the Schrader valve side. It's held in place just by a bayonet mount. A small counter-clockwise turn is all it takes, then the ring can be pulled off.

The upper part of the Schwalbe / SKS CLIK Valve SCV tire pump head adapter (rubber-coated) can be easily unscrewed from the lower part with the Schrader adapter (threaded part). When assembling the printed adapter, it is important to reinsert the small rubber seal which is located inside!

I printed the adapter on my Core One with a layer height of 0.1 mm and it works without issues up to 4 bar. I don't need any more pressure.

For information: The thread of the Schwalbe / SKS CLIK Valve head is 0.5 in x 1 mm 😉.

Tagi