1 / 6
Bosgame M5 Mini PC Wall Mount / Wandhalterung (Non-VESA Solution) — image 1
1 / 6

Bosgame M5 Mini PC Wall Mount / Wandhalterung (Non-VESA Solution)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a wall mount for the Bosgame M5 Mini Pc.

Rating
5 / 5
Likes
2
Downloads
9
Makes
1
Views
105
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

The Bosgame M5 Mini PC does not come with factory VESA mounting holes, restricting it to sitting flat on a desk. This custom, two-piece mounting system solves this issue entirely, letting you mount your Mini PC securely to a wall, inc. a place for the power supply.

Features: Thermal Friendly: Designed with a built-in offset from the wall to ensure plenty of rear ventilation. Your Mini PC's intake and exhaust profiles remain completely unobstructed.

Modular PSU Storage: No messy power bricks lying around. The optional PSU bracket (included as a separate file) effortlessly slides onto the top-side tracks of the main mount after it’s screwed to the wall.

Gravity Fit: The PC simply slides into the main bracket from the top and stays locked in place securely.

Print Settings:

Material: ABS (recommended for its robustness and thermal stability under continuous heat load)

Layer Height: 0.24 mm

Infill: 15%

Supports: Tree Supports enabled

Orientation: Print standing up.

Hardware Needed: 3 screws

Category: DIY

Tags