Bosgame M5 Mini PC Wall Mount / Wandhalterung (Non-VESA Solution)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the Bosgame M5 Mini Pc.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 105
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The Bosgame M5 Mini PC does not come with factory VESA mounting holes, restricting it to sitting flat on a desk. This custom, two-piece mounting system solves this issue entirely, letting you mount your Mini PC securely to a wall, inc. a place for the power supply.
Features: Thermal Friendly: Designed with a built-in offset from the wall to ensure plenty of rear ventilation. Your Mini PC's intake and exhaust profiles remain completely unobstructed.
Modular PSU Storage: No messy power bricks lying around. The optional PSU bracket (included as a separate file) effortlessly slides onto the top-side tracks of the main mount after it’s screwed to the wall.
Gravity Fit: The PC simply slides into the main bracket from the top and stays locked in place securely.
Print Settings:
Material: ABS (recommended for its robustness and thermal stability under continuous heat load)
Layer Height: 0.24 mm
Infill: 15%
Supports: Tree Supports enabled
Orientation: Print standing up.
Hardware Needed: 3 screws
Category: DIY