CRKT CEO Compact Scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scales for the CRKT CEO Compact pocket knife
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I couldn't find a model for scales that actually fit, the one I did find had spacing that didn't seem to fit my knife. There is one version that is a blank plate, and another with holes that match the ones on the cut plates on the inside of the knife.
As the scales are not of a uniform thickness, I would suggest orienting them with the outward-facing sides on the bed. You will need to create a copy mirrored across its X or Y plane. The set pictured were printed at 0.08mm layer heights with fuzzy skin enabled.
These scales aren't a perfect replica of the originals, as it seems the large chamfers of the top profile are a bit off, and the version with holes has the holes 0.25-1mm off center, I may revisit this in the future to address these issues.