Counting matching models…
I figured it was time to move to the dark side for a bit and came up with this design - in hindsight, it looks like something Sauron would be wielding if he was a Sith Lord. This is my third modular saber, following The Guardian . I will…
‘The Guardian’ This is my second modular saber, following ' The Master .' With this saber, I'm offering you more options to customize it according to your preferences. It comes with various emitters, shrouds, rings, pommels, end caps,…
Six months ago, I embarked on the design journey for what has now become this modular saber. Over the course of those months, I've fine-tuned and experimented with various iterations. This saber is intentionally modular, allowing for…
LUN5HTIME's OTF design has already provided me (and Christmas gift recipients) hours of enjoyment. I did run into a few issues that prompted me to make a few changes and then I went down a rabbit hole. Most of the changes I made were to…
Jurassic World Camp Cretaceous Bumpy
If you like my models or would like a specific model made please consider donating. 1:200 Desk Model of the Airbus 320-200 CEO. The .3MF file contains the parts for the print.
Perhaps a tale unfolds—a Jedi, once revered, now cast from grace within the order. Their beliefs diverge from the Jedi code, challenging tradition. Or maybe I was just trying to figure out a cool name for this hilt. You decide. This is my…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Camera mount : Can be printed in either flexible filament or rigid and durable filament. I do not recommend using PLA. Use either TPU 95A if you want flexible, or ABS/PC if you want to use rigid filament. You will need to remove the two…
My wife decided to try and use Diatomaceous Earth to rid our house of some tiny silver fish. The powder is cheap enough on the big A, but the applicator was like $10 USD. Firing up FreeCAD 0.20 was able to design a two part applicator the…
Here is the 3D scan of Douvilleiceras gr. mammillatum , an ammonite from the Cretaceous (more precisely from the Albian). If you want to know more about this species:…
mods for CEO's Kanan Jarrus Lightsaber.
Jurassic World Camp Cretaceous Toro
Geometric Glaceon Pokémon
Introducing our "Glaceon Keychain" – a must-have for Pokémon Trainers and dedicated Eevee enthusiasts! This intricately designed keychain goes beyond mere accessory, making a bold statement reflecting your passion for the enigmatic…
This is a Hueforge STL of an Eevee/Glaceon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
Caduceus as a symbol of medicine. Created it for one of my friends who is studying medicine. The symbol was downloaded as a picture and re-traced in online SVG tool for better quality (in vector format). The model is supposed to be…
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
Slides over standoffs, parts orientated, no supports needed. Supports O3 camera with loss of FOV.
I am new to printing and drones an i couldnt find a mount for the M100 from HGLRC so i made a simple one. TPU 30 % infill (maybe less but thats what i went with)
Just a quick TinkerCad model of a Thigh Holster for the Blaster and re-mixed thigh armour for mounting holster. I used glue to mount the holster (I know ceo51378 doesnt like glue but…)
This design is a combination of the front and rear bumper for the TBS SourceOne V3 integrated with my antenna mount design for the Happymodel ExpressLRS ep1 antenna. This design is also a remix of the TBS Source One Accessories but this…
Slatwall Apparel FaceOut Type AERO - Gancio per parete attrezzata Tipo AERO Lenght-lunghezza 150mm Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our…
Star of Life, DNA, and Syringe Earrings Patreon Request 2 Sided version and Flat version (All Versions Untested) are available for Patreon exclusives for the 2 commercial tiers. Check out my other Health Care Earrings! I print all my…
An adapter for the 19mm wide AvatarPro camera to the 28mm wide frame of the TBS SourceOneV3. Printed in TPU for damping reasons. Uses 4-6 M2 hex-nuts.
Just a Apex-Style VTX SMA stubby mount for the pigtail. Added one version without the extra holes for the to screws but instead with a hole for a hex nut. Update(2022-03-14): Recognized that a 6mm hole for the version with just that hole…
Antenna mount : TPU 95A, supports only on the build plate under the small arches at the bottom. The two antenna legs don't require supports. Mount support & spacers : Can be printed in any non-flexible filaments, I used Polycarbonate for…
A remix of somebody else's model for CRKT CEO scales, modified to fit the Flipper variation of the knife. Made the model longer, changed a screw location, and edited out the thumb stud spot. Idea originally stemmed from me spray painting…
A Pokémon card stand in the shape of Leafeon. Supports will be require for the ears. Printed with a layer height of 0.2 and a 0.4 mm nozzle.
Arm and Motor guards/bumpers for Source one V5. Thick and thin versions. Thick version is around 6g per with Voron V0 TPU settings.
SlatWall Apparel FaceOut 150mm Lenght-lunghezza 150mm Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file, please…
Tl;dr: I’ve made a Glaceon coin from the Pokemon TCG Pocket app. I’ve included a whole bunch of info if you want to print it as accurately as possible to how it looks in the app, but at the end of the day, you can probably get away with…
EZ Print Arm Protection for your TBS Source One frame. Clips On for a perfect fit so no need for screws! Access to center screw if needed. Printed in SainSmart TPU - 3 Walls - 40% Cubic infill Print with Supports OR enable “ Make…
Motor guards based on my previous design of arm guards. Not printed or tested yet, so any feedback is welcome. Print two of each. WIP since taking requests for changes. 19 February 17: added 16 mm version (total height), original version…
T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Case with press-fit mounting for STM32 Nucleo-64 development boards. Print Settings Tested with Spectrum PLA, 50% infill, and 0.2 mm layer height. No support needed Tested Boards Nucleo-L476RG Nucleo-G474RE Let me know if it works with…
Bring a bit of nostalgia with you wherever you go with this fun Glaceon Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
my first design for a better cooling duct for the windstorm S1 printer, still testing and tweaking.
This is a mount for a GoPro 12 and maybe some other previous ones.
newer version of my Sceoan Windstorm S1 Fan Duct longer holes with vanes to direct the air print at a slower speed and no supports are needed
My brother was annoyed with the flimsy plastic box insert that came with the Herbaceous card game because the slots that held the cards were narrow enough that taking the cards out could bend them and cause damage. The cards also did not…
The colored version of Jurassic World Camp Cretaceous Bumpy @pavelbenes_894775. The model on pictures is 400% scaled, colored and printed with Perlin fuzzy skin and strengthened tail with 5 walls and 75% infill.
A Gate Color Indicator in a ZEN like stairway garden IT shows to the Employs what CEO Mood is ON LOL “The GATE Colors and Walls are usaly not beside the the GardenDiorama” PRINT it as your size like smalest is 60mm roufly 3inches for good…
Front bumper for Source one v5 Designed with socket head screws in mind. Will still work with button head.
A version of my ExpressLRS antenna mount design. Should fit for the TBS SourceOne V5 frame. I don't own one, so I had to rely on specifications and other uploaded designs for this frame.
Go forth and customize your accessories
Prevents battery from slamming off the front of quad. Dual purpose GoPro option. Designed with socket head screws in mind. Will still work with button head.
Sam Altman OpenAI CEO - Funko Style Toy For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well;…
building an INAV capable sourceone 5inch.
Includes all the most useful parts I've found over the past few years including: Motor guards/arm end protectors Motor wire covers Battery cable clip for power wire strain relief Camera guard VTX SMA connector bracket All printed in TPU…
made specifically to hold the antennae for a walksnail Micro VTX, but will handle any VTX with dual antennae and a GPS 880 with Compass. This basic design works well with both the HGLRC (my default) and the RDQ 880 GPS receiver. March28…
intended to be printed in TPU, one plat has a cutout to accommodate the USB port placement, but your mileage may vary depending on the board layout. otherwise print one right handed and mirror the other.
low profile runcam thumb mount to fit the front four holes on a TBS Sourceone HD 5inch FPV frame rear cut version better fits the stock battery pad
Hello guys, Kudos to @deft0nes for his design, I just modified it a bit to fit the v4 frame which has a different spacing. Category: R/C Vehicles
A dual antenna mount for the SourceOne V5.1 drone frame.
Transform your 3D printer into an artistic powerhouse with this stunning STL model that captures elegant feminine beauty in digital perfection. This gracefully posed figurine showcases flowing curves and sophisticated styling, making it…
crazy amount of space for an FPV camera, would easily fit a 25mm mini camera. 6mmspacing between mounting holes and meant to flex to hold tension on the camera. allows for a 30 and 45 deg up tilt. Update March 27 2023. 6mm standoff…
Mounts for: GPS M80Pro (26mm x 25mm x 8mm) XT60 Caddx Vista antena HD lower 6mm version mounting on: TBS Source One v3 Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2…
Es handelt sich um ein Geocache Mystery Coin.
File Info Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! Print it in…
Quick Edit with Tinkercad adding a mount for a VIFLY buzzera 13mm Capacitor with space for a Skystars ELRS RX under the cap https://www.tinkercad.com/things/8fE27xkF3Dk
25mm mounting for a 20x20 pattern using the center standoffs as the front facing mount point. This model is an exact replica, with 6mm standoffs and a small lip to aid in retention.
Clip to avoid the ankle to come out from the wall when screwing. Works for systems like Element-system or Spaceo (Leroy Merlin) Two version: ClipCremaillere-rxxx - Simple : for single slotted wall upright ClipCremaillere-rxxx - Double :…
Es handelt sich um ein Geocache Letterbox Coin.
Model of feet and arm protectors for the SourceOne V5.1 5 inch drone frame.
Remixed this. Few changes: added about .75 mil of height. The original is a tight fit and holds with friction, problem is it stretches a tad and the vertical bars on the face "warp" inwards. Not a big deal, it just bothered me. pulled…
SourceOne V4 & Apex - GoPro Hero 11 Mini Mount - Side Load & Vented Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top originally clam shell style. Check him out at: https://www.youtube.com/c/PokeyFPV Category: Other
I did not find any feet for the SourceOne DeadCat version that I liked. I find that the motors screws must touch the carbon frame, If they squeeze the TPU part they come apart. So I make my own in freecad, sourcefile and step included.…
I just edited the mount so that it will fit the standert battery pad that comes with the frame. I would recommend to print it with low infill and a little bit bigger so that you can take the GoPro easier out and put it in. (101%-103%)…
Camera mount : TPU 95A, supports only on the print bed, supporting the drop under the screw hole. I recommend printing using 100% infill
Arm guards for SpaceOne FPV 220x. Can't name them motor guards as they almost do not protect the motors. Clips right onto the arms, can be fastened using zip ties (but not really needed). Designed with integrated support, as the supports…
print out of tpu. for 20mm standoffs Category: R/C Vehicles
I tried out several other online available hero3/4 mount designs for my s1v3 7", but they all resulted in major jello. So I set out to design my own, focusing on advice from Oscar Liang that a harder mounting is better than floating. The…
CRKT CEO FLIPPER Grip Fix! This is a replacement part I modeled myself for the CRKT CEO Flipper. Which fixes the main issue I had with it, that the bottom metal plate that holds the clip is extremely sharp and digs into your hand. I also…
So there is not much choice out there in terms of fan ducts for this printer. So ive thrown my hat in the ring for what its worth. I created this in Blender, i know no CAD sadly. I used the geometry from the one other fan shroud out there…
Another version of my design for an antenna mount for the TBS SourceOneV3 Frame. This one has extra protection for the antenna tips. Like shown in one of the pictures you have to add a little cut to more easily insert the anteanna tips.…
Proyecto de edificio para centro deportivo
Holds Holystone remote ID module. Print standing tall.
You are CEO and none of your employees takes you seriously? Then wear one of our golden CEO name badges and get the respect you don't deserve ;-). Tested with a resin printer Gold edging pen for the colour.
Es handelt sich um ein Geocache Event Coin.
After faffing around with the original fan and a variety of fan ducts to fit the original fan I ended up designing a whole new hotend cover to utilise two 5015 fans that I had knocking around from my now redundant ender 3. Pros: Insane…
Ersatzteil für die 5D Armlehne BackforceOne/ Plus
Small update. i made counter sinkholes for the wall mount screw's for easy mounting. And a second type that you can hang the ones with a cord in between the two sockets. it's a advise to print in 20% or 25% infill do to strength needed…
I run an elrs 2.4 dual rx on my 7" sourceone v3, and needed a better front mount to go with it. So I designed this in f360, and it works well. It features a stiff mount for less vibes, and no printed material wrapping the feed point or…
The metal rack came without foot caps, so I had to make them. The ones of printables didn't fit - since the metal profile is bended on the edges. The foot is 5mm tall, the space for metal profile is 3mm wide and 37mm long. I would…
Remix of a design not on this site. Recreated the mount body in Fusion360 to have a clean model to work with. Modifying a mesh (and thus having a face consist of like 3000+ triangles) got old pretty darn fast. But since the design (for a…
The TBS Triumph Pro antenna is quite long so I thought it should be mountet inside the frame. It works good and it takes load off the connector by supporting the antenna at two points.
Main diving mask body Layer must be 0.15 Organic support Abs
This is a mount for the HGLRC M100 mini GPS.
Je continue la série avec le général mais pour la fin de la série je vous prépare une pièce digne du genre
Same as the original but 5mm wider. This is intended to be printed in TPU, but with the additional girth, the solid version can be printed rigid and mirrored to fit both sides. The USB cutout side has a recess that allows easier access to…
Liceo Democrito High School Logo and keyring modeled in TinkerCad
Es handelt sich um ein Geocache Webcam Coin.
if you have any questions feel free to message me through printables and also i will be making more models to upgrade with this printer if you like the model please consider following me
Pata para una balda de Spaceo 60X10MM. Tinkercad: https://www.tinkercad.com/things/7tGAvONWbLG
if you have any other questions feel free to message me through printables I used the orca slicing software with the marlin generic gcode If you likethe file consider following my page I will be designing more accessories for the printer…
