2016 Hyundai Veloster Reverse Lockout Collar Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.51 – €0.62 net (excluding VAT)
For file: ShiftCollarShroud.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Covers the exposed portion of the reverse lockout spring when using a flange nut to run an aftermarket shift knob.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I made this shroud to ensure that the reverse lockout spring can't slip over the flange nut on my shift knob extension. It requires a m10x1.25 flange nut that press fits into the bottom side of the cover. I've included the models so you can change the dimensions to allow for different diameter shift extensions.
You may have to print a couple to get the press fit tolerance right for the flange nut.
Prints in one piece without supports when oriented with the 'top' against the bed.
Please use locktite on the flange nut so it does not come loose while you're driving. This does not secure the shift lever adequately. Use at your own risk!