2016 Hyundai Veloster Reverse Lockout Collar Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers the exposed portion of the reverse lockout spring when using a flange nut to run an aftermarket shift knob.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I made this shroud to ensure that the reverse lockout spring can't slip over the flange nut on my shift knob extension. It requires a m10x1.25 flange nut that press fits into the bottom side of the cover. I've included the models so you can change the dimensions to allow for different diameter shift extensions.
You may have to print a couple to get the press fit tolerance right for the flange nut.
Prints in one piece without supports when oriented with the 'top' against the bed.
Please use locktite on the flange nut so it does not come loose while you're driving. This does not secure the shift lever adequately. Use at your own risk!