ExoBass - Wing Sets - Hollow

Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com

Plan Your Build & Get Hardware

ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoBass - Wing Sets - Hollow, on our site.

Step 1: Heat Set Inserts

Step 2: Glue body together

ℹ️ The pins are different sizes. Take some time to identify which ones go where before putting any glue on.

Step 3: Glue in Control Panel

Step 4: Strap Mounts

Step 5: Attach to Core

Step 6: Cover Control Panel

Step 7: Optional Pickups

If you would like to attach either the Lace Ultra Thin Pickup or the Over String Pickup Mount to this WingSet, you will need to print and install the Pickup Core.

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.57 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $75.06.

• 12x Screw - Button Head - M5x10
• 12x Nut - Slide In - M5
• 2x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged
• 10x Screw - Flat Head - M3x10
• 10x Screw - Flat Head - M3x20
• 20x Heat Set Insert - M3 - 5mm OD - 4mm L
• 2x Strap Buttons
• 1x Jack - Output - Mono 1/4in