ExoBass - Wing Sets - Hollow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed bass part — full catalog, build planner, and assembly guides at https://exobass.com
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com
Plan Your Build & Get Hardware
ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.
You can find this specific part, ExoBass - Wing Sets - Hollow, on our site.
Step 1: Heat Set Inserts
Step 2: Glue body together
ℹ️ The pins are different sizes. Take some time to identify which ones go where before putting any glue on.
Step 3: Glue in Control Panel
Step 4: Strap Mounts
Step 5: Attach to Core
Step 6: Cover Control Panel
Step 7: Optional Pickups
If you would like to attach either the Lace Ultra Thin Pickup or the Over String Pickup Mount to this WingSet, you will need to print and install the Pickup Core.
Hardware
DIY Kit
You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.57 plus shipping.
Self Source
If you want to order the parts yourself, here's a list. Estimated cost: $75.06.