1 / 2
1" Pex Arch Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pex Arch Base for Christmas lights
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 188
- Makes
- 2
- Views
- 1,117
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- BSD License
1" PEX Arch Base. I cut a 5m LED strip in halve. The PEX needs to be 2.5 meters or about 8'3". The bottom bar are a 5' foot piece of 1/2" PVC. The bases holes show be large enough to fit a X-Connect connector. The screw holes are designed for #8 x ½" machine screws. The “Pixel Strip Holder” is used to hold the strip. I tread in nylon screws into the PEX and cut off the heads. I used infill density = 50%, wall line count = 4, infill pattern = lines.