1 / 3
Shards of Infinity HP and Mastery Level Counter — image 1
1 / 3

Shards of Infinity HP and Mastery Level Counter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tired of the flimsy included cardboard counters? These are a nice upgrade to track your HP and mastery level!

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
51
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Share Alike

A snap fit, easy print replacement for the flimsy cardboard counters that are included in Shards of Infinity. Includes SVGs to optionally deboss simplified HP/mastery level symbols into the face of the counter to mark which number is which (right click on part > add negative modifier > SVG in Orcaslicer).

Instructions

Printing

For one complete counter you'll need to print:

  • 1 case_front (choose between blank or with symbols)

  • 1 case_back

  • left wheels:

    • 1 each of wheel_health_left and wheel_mastery_left for player counters

    • 2 wheel_boss_left for boss counters

  • 2 wheel_right

  • 2 of your choice of spring (spring_firm or spring_soft)

    • Note that player wheels are only compatible with the soft spring. If you want more clicky player counters you'll have to use boss wheels

No supports or special print settings required. 

PETG recommended. It would work with PLA too but creep will make the springs lose tension and it'll become less clicky over time. PETG will creep much less. ABS would theoretically creep even less but the minor improvement is probably not worth the hassle.

I recommend inserting a pause and swapping filaments (or using your multi-material system if you have it) to get crisp symbols/digits and avoid the pain of painting in each digit individually. Unless you enjoy that kind of thing, you do you.

Assembly

  1. Slot the springs into the case front

  2. Slot in the wheels, numbers down. Make sure to put the left and right variants in the correct place. The wheels are named by which side they're on when looking at the assembled counter from the front. Don't worry though, if you get it wrong it should be fairly easy to pull off the case back and rearrange them.

See the images for reference.

See Also

I made a deck box with space for six of these counters for more space efficient transport if you just want to play against your friends :)

Edit 2026-09-26

I added variants of the wheels to have the correct number of digits for 10s on player counters like the originals (up to 30 for mastery and 50 for health). These can only be used with the soft (one-armed) springs, otherwise you'll get clicks in the wrong places. Also added a case front with the HP/mastery level symbols already debossed in (bigger too for visibility).

Tags