Nintendo Switch 2-piece joycon grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nintendo Switch 2-piece joycon grip
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
I split EbonNebula's original design in two to solve a few problems I was having:
Difficult to print the narrow side rails from any orientation.
Original rails were about .2 mm too thick and required excessive sanding to thin out.
By cutting it in half it made printing much easier for me.
Required hardware:
(4) M3x12 screws
(4) M3 hex nuts
Print Settings
Printer: Folger Tech FT-5
Rafts: No
Supports: Yes
Resolution: 0.2 mm
Infill: 15%
Notes:
The supports for the counterbore/hex nut recesses can be tricky, but it's doable.
Credits
Note:
I've only modified the 0-degree rails from EbonNebula's Nintendo Switch Vangard Grip (V2.1). The remaining STLs were originally created by EbonNebula and reuploaded here to make this download a complete set.