Killer Instinct Dual MOD - Center PCB Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KI PCB Support when using the universal acrylic case as seen in the KI Dual MOD project.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is the center PCB support model I made for the Universal PCB case that houses the Killer Instinct Dual MOD listed here:
Main Center Support is the base that fits nicely into the cut acrylic. The Notch in the center support should be facing the front of the PCB. The 3MF file labels all the directions and should be facing you from the front. Should be intuitive from that point. You put the center brace in first, then the blocks in their respective corners. The KI Dual MOD will go over the posts in the base and then you can put the PCB on top. It should sit flat on all 6 supports (2 from the main center support and 4 corner blocks).