Modern Table Lamp STL — Pleated Column Shade + Spiral Twist Base

A sculptural modern table lamp inspired by organic and Scandinavian design. The shade rises in a tall pleated cylinder, its surface defined by deep vertical ribs in a fluted, column-like profile. The cylindrical base is covered in a diagonal spiral rib texture, giving it a twisted, sculptural quality that contrasts beautifully with the clean geometry of the shade above. Minimalist yet expressive, this lamp works as both a functional light source and a decorative home accent.

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.

PRINTING & ASSEMBLY
• Print-ready and tested.
• Support-free design.
• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps).
• Supports printing with PLA, PETG and other standard filaments.
• Assembles easily without glue or screws.

MODULAR SYSTEM
Mix and match filament colors, or pair this model from the UNI series with other interchangeable bases and shades from the UNI or AIR series available in my profile. AIR shades fit AIR bases directly, and they also fit UNI bases or  most home lamps using the included adapter (UNI shades do not fit AIR bases). Follow my page for regular modular design updates.  

DIMENSIONS
• Shade: height: 210 mm (8.3 inch), width: 135 mm (5.3 inch)
• Base: height: 80 mm (3.1 inch), width: 85 mm (3.3 inch)

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~80 g, base ~110 g.

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~2h 20m
• Base: ~2h 30m

WHAT'S INCLUDED
Files for Lamp Shade and Base:
• STL — 2 files (Shade + Base), print-ready (tested and verified on Ender 3 S1)
• OBJ — full lamp assembly (Shade + Base combined), for import into Blender, Cinema 4D, or any 3D software
• 3MF — 2 files (Shade + Base), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

PRINT SETTINGS (recommended):
• Shade, Shade Insert: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters).
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).

Use LED bulb ONLY!

A lamp cord with E26/E27 is required (not included). Search "plug in lamp cord kit E26" on Amazon or your local hardware/lighting store.

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask!
Visit my profile & follow for more designs — new models added regularly!