Counting matching models…
I made the adapter to fit the hygrometers that I routinely buy from Amazon that are used in my dry boxes. There are two files, I am using the one for ABS. The other one is tighter and may work better in pla. I included both step files if…
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
I had a sideclick that was used with a roku but changed over to Chromecast with Google TV and I didnt want to buy the google remote version of the sideclick so i made one. Its a two part build with the blank side that can be used if you…
Reoriented Y mount to maintain accel orientation
Color change by layer at 100% scale, 0.1mm layer height: 1 - 7: any base color 8: Yellow (star) 11: Green (cactus) 14: Red/Orange (heart, presents, star, hats) 19: White (dino body, present ribbons) 25: Black (dino outline) 30: Blue/Green…
Vacuum bags are great for storing filament but they're notoriously fragile and can easily be punctured by sharp edges or wear out due to over-stretching. I've also included versions with a hole in the center to hold those round generic…
Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the round Hygrometer, there is one available for the…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the rectangular Hygrometer, there is one available for…
Thanks to the ears the silica gel container fits to any spool width even if it is less high than the spool width.
For Samsung TV, Soundbar and Google chromecast remotes
By attaching it to the hinge, the position of the thermo-hygrometer can be varied. This way, you can measure the temperature at the upper or lower hinge without needing any additional mounting holes. Suitable hinge:…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
Chrome skye is my futuristic cyberpunk city. Usable for star wars, tau for the greater good, infinity and other similar factions and games. The set is designed for compact storage. Each piece is stored within the one under it.…
UPDATED: 2026-01-05 the V3 models below are the good ones... I have greatly improved the airflow and printability of the model. It is now possible to print with the front face at a 45 degreee angle to the build plate, which greatly…
💛 Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports autour de la fiole et de la clef délicate. Alice est prête à plonger dans son aventure, entre…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
This is a pretty rough but already functional prototype of an armrest spacer for the Alfa Romeo 159. With my height of 176 cm, the armrest height with the spacer became just perfect — before, I could barely even reach it. For now, I’m…
I was frustrated with the hygrometer always being hard to find & see inside the vacuum bag when checking values. That's why I designed my own. Does not stay in the filament spool by itself! Is held in place by vacuum bag. Verified with…
This hygrometer stand is designed for 45 mm diameter circle hygrometer models that have retaining clips at a 35 degree offset. The objective of this project was simply to design a stand for the hygrometers that I purchased off of amazon…
A mount for the TronXY "TR" ABL sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is a few mm too short for the "TR" sensor in combination with a Volcano hotend.…
Remix of PhilippSorenses's remix of PsychProd's original. I had the small issue, that my silica gel beads / pearls were uneven in size and sometimes broken. That led to a lot of them falling through the main container's wall. I slightly…
Welcome to Ancient Rome! Joel Ristol, aka @ 1.6_3dart shares this incredible historical model of the Eternal City, a reconstructed interpretation of what Rome probably looked like around the year 250 AD. This model is unlike most of our…
Showcase automotive artistry with this 3D printable STL model of the stunning Alfa Romeo 8C 2900 Spider. Revered as one of the most beautiful cars ever made, its flowing lines and powerful legacy make it a prized addition for classic car…
3D printable replacement frame for the White Round Glasses #3229730 that Zenni has decided to sunset. My friend tasked me with 3D printing these frames as his broke and Zenni no longer carried them. I got to learn how to reverse-engineer…
Total printing time:~11h25m Used filament:~116g 0.12mm layer height . Not colorized Inproved strenght by 2 walls,infill 100% you don't need to add support, the program did it by default.The support is easy to remove and requires no tools.…
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.…
This is a simple hydrometer, humidity meter, holder using three 8x3mm magnets. You can replace the hydrometer battery without removing if from the holder. You can use any material to print it. I used PETG. Hydrometer:…
This square mount is specifically designed for Thlevel model . The device snaps perfectly into the mount, staying secure while remaining easy to remove. Questo supporto quadrato è realizzato appositamente per il modello Thlevel . Il…
The clamp holds the hygrometer in a relatively convenient position. The included M8x8 T-bolt is good. The threads on my clamp are not, so the fit is tighter than it could've been. Dry-fit the T-bolt and tighten it just enough to hold the…
I printed the Hygrometer for AA Batteriy Case thanks to Mark for the nice stuff, but I missed the possebility to mount the part into my fillament storrage with the poeesbility to exchange the batterie. Therefore I designed two different…
The true genius of this design lies in its function. The crown of her head opens to a perfect cradle for your plant to flourish. As your chosen succulent, air plant, or vibrant flower grows, it creates a living, breathing "biological…
Modeled myself in fusion 360 using the gridfinity design. designed around the Starrett part number 234a-6 rods. Fits in short Kennedy toolbox drawers. Please like, follow, rate and upload your makes.
I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
I have downloaded many models designed by others, and they have quite a few flaws—for example, requiring extra screws or having an inconvenient viewing angle. That’s why I designed this model. This is Thermohygrometer Casing 3D Model. No…
A 4x2 gridfinity bin for the Moore & Write internal bore 2 point micrometer
Simple part to fit a round igrometer inside the Anycubic ACE. The sides are sized to fix the device inside the middle section of the transparent lid.
A simple holder for the round Xiaomi Bluetooth Temperature and Hygrometer to put it on any magnetic surface. 2 10x10x5 magnets are required
Hydrometerhalter für 18mm Holzregale, zwei M3 Schrauben benötigt.
This is a 2 way (vertical or horizontal) side mount bracket for the typical round hygrometer that need a 42mm hole. Made this for use with the ezystorage 79-Quart Waterproof Clear Latching Gasket Tote I use for storing filament. (FYI you…
had a few extra screw holes free on my BMCU after mounting it to my A1 Mini, so thought I'd make a little Hydrometer holder. It uses two of the screws that come with the BMCU (M3x25mm IIRC), and should work with all the variants of the…
A simple way to attach a hygrometer to your filament dryer. I noticed the accuracy was not quite right on my dryer so I added this as a second check.
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Project Description Hi everyone! 😊 This is an improved Filament Guide specifically designed for the Anycubic ACE Pro . I’ve optimized the design to use less material for better transparency (making it easier to see the filament) and lower…
3D printed prototype of a steering wheel codenamed tangram , as you can use the same pieces (in theory) to build it as you wish. The difference between theory in practice is bigger in practice than in theory. .step file includes kitcard…
Magnetic Hygrometer Holder – Compact Mount for Containers Keep your humidity readings visible and secure with this minimalist magnetic hygrometer holder. Designed to fit snugly inside plastic bins, dry boxes, or any enclosed space, it…
Keep your filament dry and optimize your 3D printing results. This adapter holds a small rectangular digital hygrometer and enables you to monitor humidity levels at a glance without having to open the box. A simple mounting solution with…
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
Le stade Orange Vélodrome de Marseille - OM Ce modèle est gratuit pour un usage personnel. Si vous aimez mon travail et souhaitez me soutenir, vous pouvez m'offrir un café via le lien sur mon profil ou directement avec PayPal :…
Support for your filament coils that incorporates an integrated reservoir for silica gel balls and with a slot for a rectangular thermometer hygrometer with dimensions of 47.5 x 28.5 mm. It consists of three separate parts: The chassis…
Insert for the bordgame fall of rome fit sleeved cards (66x91mm) x1 Insert x1 Large bin and lid ( for roman legion ) x5 small bins and lid ( for Barbarian ) fusion 360 file included for the insert .
I got a 12mm inductive probe but didin't find any bracket for this size. I remixed the pinda ABL bracket.
Elevated hygrometer holder for the popular filament boxes from Aliexpress/Temu. The hygrometers that fit in the lower holder won't have good air flow there. Also, the openings of the hygrometer can be blocked by the plastic. Those are…
Chromecast Remote Wall Mount / Holder – Minimalist & Secure Keep your entertainment setup organized with this clean, minimalist Chromecast Remote Holder . This wall-mountable sleeve is designed specifically for the modern Chromecast…
This is an all new model, inspired by the design by RealityTake2 . My model can be attached to the container lid either using small zip-ties or for a more finished look with 8 to 12 mm long M4 screws.The lip that the mount attaches to are…
This fits the inexpensive rectangular temp/humidity sensor from Amazon.
Jake Lunt Davis is a concept designer, here he drew up some new R2 style droids. My friend Mike asked me to recreate some of the components into 3D printable parts. Check out Mikes build here:…
I designed it for my friend he used it to metal caste knife from bronce u might have to ajust the size of the model when u have tipps for casting and grinding please write them in the comments
Printing without support. If the slicer complains about missing support, you can ignore it. The latch inside the housing has a gap of 0.2 mm. I used neodymium cylindrical magnets with a diameter of 5 mm and a height of 4 mm. The magnets…
Don't want to drill holes in your dry boxes? This magnetic hygrometer mount allows you to place your sensor exactly where you want it without compromising the airtight seal of your dry box. The mount consists of two parts: an internal…
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
The Input Shaper needs to be calibrated from time to time. This is necessary after changing the installation location, adjusting the belt tension, or changing the area around the Nextruder.
A 3d Print replica of the Doomsday Clock for the boardgame Andromeda's Edge for the Plutonian Empire Faction. There are two versions, one that utilizes a token and the other that uses a clock-hand. Also, there is a 3MF (colored) and STL…
A stand for the generic round hygrometers that can be found cheaply on aliexpress. Prints "face down" without supports. Note that this is only for the type with the locking tabs at 11 and 5 o'clock positions.
A little, fast printing mount to fit a 42mm circular hygrometer to the HSW system. Probably best fitted hanging over the edge to allow plenty of airflow around the meter. There are two models, with the insert at different rotations, for…
A print in place phone holder with a hole to fit a 42mm diameter hygrometer. Thanks to Gugalynn for the original phone holder design.
Prometheus Engineer STL Original Model design not found anywhere else. For either FDM or Resin Printers. Follow me for all my designs!
The battery cover was 3D scanned separately and merged in Revometro. The accuracy of the volume buttons is slightly off due to the merging. The rest of the mesh should be accurate. The model was scanned with my Metro X scanner in laser…
I got a package of four hygrometers ( like this , for example) and didn't want to keep them in their original boxes. Each came with a battery installed and a spare battery. I already had an LR44 tray, but since the hygrometer is too wide…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
This remix alters the hygrometer lid to have relief slots in the mounting hole. Maybe it's a regional thing, but the round hygrometers I buy in the US have tabs that stick out which make them difficult to insert into a hole without relief…
Minimalistischer Halter für einen Runden Hydrometer mit 5x3 mm Neodymmagneten
There is no potted tall flower in Minecraft to "borrow" the design from so I did it myself. Its designed to be painted so no texturing on the parts. (I will update when I paint it) The current part has some warping as I printed in ASA but…
For T-Nut 2020 fasteners, you can either print them or buy them
Mount for this hygrometer from Amazon: https://www.amazon.com/dp/B0F4R58YKD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 I use this to hold the hygrometer on the interior of my filament storage bins so the display sits flush with an…
Magnetic Holder for LCD Hygrometers with 3 Variants, that only changes the Magnets. 2 6x2mm Disc Magnets - The easiest to detach from for example the Fridge 1 20x6x2mm Magnets - Sticks better to Metal 2 20x6x2mm Magnets - Sticks the best…
This grommet allows you to leave the accelerometer attached at all times, and keeps the cable out of the way when not in use..
Also have a look at my v2 of this model: Depending on the filament stored you can either print it in PLA or PETG. You need 2xM3 hex nuts and 2xM3 15mm screws (everything above 12mm should work). With this model you will not get any…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
A crude spirometer model. Scale up or down to your pleasure! This was originally made for a HOSA project. FarmnetRX
Design Concepts This logo features the brand's iconic logo, with an elegant and dynamic aesthetic, synonymous with precision and excellence. Perfect for any Alfa Romeo enthusiast. Let me know if you'd like another design, and I'd be happy…
Adapter to place the Hygrometer into the Lid, including PTFE outlet
Refer to https://volksswitch.org/index.php/volks-devices/keyguards-for-chromebooks/ for more information about this and other Chromebook keyguards and a general designer for Chromebook keyguards.
![Chrome Dino Festive Christmas Tree [Ornament]](https://media.printables.com/media/prints/1109124/images/8380518_72de2fb6-757f-450c-95f5-0d3052fb158b_847bb7fc-93da-4c38-993b-17c0858eb5a9/pixeltreedino.jpg){kind=tracking}
