1 / 2
Combined Desiccant Cup / Hygrometer Mount for Filament Dry Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An integrated desiccant/hygrometer holder for use in a filament storage plastic dry goods box.
- Rating
- 4.333 / 5
- Likes
- 250
- Downloads
- 1,589
- Makes
- 9
- Views
- 9,089
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.
Additional Materials (I bought from Amazon - not affiliated with any of them):
- Wildone Cereal Storage Containers (6)
- Tasogen 12 Pack Mini Digital Thermometer/Hygrometer
- Dry & Dry 1 Quart Orange Premium Desiccant Indicating Silica Gel Beads
Features
- Plugs into existing hole in storage container lid. You can pull off the existing hinged plug on container lid for a nice, clean look
- Desiccant can be accessed without taking container lid off
- Desiccant is up where humidity is highest and there is room for a generously sized desiccant cup
- Quarter turn connection between lid and cup ensures correct alignment of hygrometer
Printing
- I used Bambu Lab white PLA with default settings except,
- In Bambu Studio, got good results by printing desiccant cup upright with slim tree support and default (weaker) support settings (Do not use the recommended settings for slim tree support)
- Lid can be printed without support with only minor defects
This Filament Storage Solution Inspired by:
- Josh Murrah filament storage solution:
2. Mordiev's Desiccant Dome:
https://www.printables.com/model/28925-desiccant-dome