1 / 5
Petlibro Dual Granary Mid-Century Modern Stand — image 1
1 / 5

Petlibro Dual Granary Mid-Century Modern Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Raise your Petlibro feeder in style with a durable stand inspired by mid-century modern furniture.

Rating
0 / 5
Likes
5
Downloads
28
Makes
0
Views
144
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

Give your Petlibro Dual Granary Automatic Feeder a home that's as thoughtfully designed as the rest of your space. This stand elevates the feeder off the floor while drawing inspiration from the clean lines and tapered forms of mid-century modern furniture, creating an accessory that looks intentional rather than like a typical 3D-printed add-on.

The elevated design improves accessibility for your pets while adding a refined furniture-like presence to your feeding area. Every component has been designed with both appearance and durability in mind, allowing the stand to blend seamlessly into modern interiors.

Assembly

Assembly is quick and straightforward. The stand uses 3D-printed indexing pins that precisely align each component during assembly while adding rigidity to the overall structure. The stand is designed to be assembled without adhesives, making it easy to disassemble if needed.

For the strongest possible build, a small amount of super glue or plastic adhesive substantially increases the stand's strength and helps it withstand years of daily use, even from the most enthusiastic eaters.

Hardware Required

The following hardware is required for assembly:

  • 14 × M3 × 16 mm Pan Head Screws

  • 14 × M3 Hex Nuts

Printing Recommendations

  • Print all structural components with 3–4 perimeter walls.

  • Use 15–20% gyroid or cubic infill for a good balance of strength and print time.

  • PETG or ASA is recommended for increased durability, though PLA works well for most indoor environments.

  • Ensure the indexing pins fit snugly. Light sanding may be required depending on your printer's tolerances.

    • Tolerances in the model are 0.1mm at all connections.

Tags