Seal's Support Interface Tuning Model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist full spectrum support interface stress test model.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Interface Tuning Jig!
I was not pleased with what existing tools here on Printables offered. I spent about an hour and a half slamming this together for personal use. It comes in around 1.2g of filament at the default scaling and has already proven useful as a quick and cheap diagnostic tool in my workshop.
Intended to evaluate support interface performance across some common test scenarios with very little filament used. Best printing practices are to be followed for best results. The model was designed nozzle-size agnostic, and may or may not benefit from scaling depending on your setup.
Targets the following scenarios:
Supports generated on the build plate
Supports generated on the build plate and enclosed by other geometry
Supports generated on already printed geometry
Supports generated under organic geometry
Misc. Info
Designed in FreeCAD