Counting matching models…
Housing for ESP32 Wroom plus MicroE M-Bus Slave Board. Reads all the relevant values from Smartmeter Kaifa MA309M with ESPHome Software from DomiStyle and integrates it into Homeassistant/MQTT.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Press Like for encouragement. Comment for improvement. Adaptor Virpil/Thrustmaster base to VKB NXT grip and vice versa. It hasn't been tested since I do not own a VKB. Thanks to crash1983 for the VKB interface! Note: 3D-printed plastic…
I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and was unable to source a replacement so I've finally got round to designing a replacement. I've yet to fully print this (20+…
Have you been frustrated because you bought a bunch of Cricutmaker pens that don't fit in your joy? Fear not! The interface is here! Simply print and go, you can use the screw to tighten looser pens like a Bic pen or colouring pencils, if…
In order to be functional, additional parts are needed: 4x M4 button head screws 16 mm long, 4x M4 nylon lock nuts, 6x 6 mm dia x 3 mm thick magnets (found here:…
Printed in ASA 0,15mm layer. glue body and ESP mini together. YAML and ESP info can be found here : https://github.com/SysAdminDk/EspHome/tree/main/IR%20-%20Heating%20Meter%20Reader IR eye ( remove back cover to fit)…
STL has moved to https://makerworld.com/en/models/109292 The STL is a refined version of the one in the photograph, it is strengthened and the interfacte strip is re-aligned for symmetry. I suggest printing with block interface pins at…
Introduction TL;DR: The Multi Modular Storage System (MMSS) and the Universal Modular Storage System (UMMS) are two customizable storage solutions, each with unique strengths. MMSS is known for its flexibility and stackable modules…
Mount your Volt 2 under your desk with this simple model that's light on filament! Uses 2 strips of 3M double sided foam mounting tape to mount. To mount, attach tape to the clips, hold them to the sides of the interface, then place where…
This is a small enclosure for the Enttec USB to DMX widget ( http://amzn.to/2GkIcdC ), these adapters can be bought quite cheaply without a case, this 2 part 3D model solves that. The DMX module fits snugly inside and the top pushes into…
A credit card sized drawing template to upgrade your UI sketches. Includes device shape, notches, app icons, buttons and common icons for interface design. Also includes an 8 column grid template. The stl is 0.6mm thick and fits into a…
I had issues with installing remote topcap on my Fox Later i found manual how to do it (https://tech.ridefox.com/bike/service-procedures/851/2018-fit4-remote-topcap-interface-part-installation), and Fox recommended to use special tool…
3 Piece assembly for the Masta Blasta ™ by Rabbit Labs . Requires 28mmx7.5mm High Power Led optical lens , picked up on aliXpress. Also requires ( 2pcs) M3x35mm screws and nuts . Files marked with s are for Flippers with Silicone…
Introduction TL;DR: The Multi Modular Storage System (MMSS) and the Universal Modular Storage System (UMMS) are two customizable storage solutions, each with unique strengths. MMSS is known for its flexibility and stackable modules…
Housing for “Commodore Cassette Interface Standard” from https://amigastore.eu/en/213-commodore-cassette-interface-standard.html .
Inspired by a model of Jon Barron ( https://www.facebook.com/groups/2957927947836312/user/1247668582/ ) This interface can be mounted on the Retra strobe and allow to connect the OS-1 snoot on the Retra strobe. The first print…
This is a case to hold the microbit and 2 audio jacks to allow a user with a disability to plug in their preferred switches and send keyboard commands to a connected computer via bluetooth. Build instructions for a case free version is…
Interface holder to secure interface on laptop monitor. Requires Screw (scr m3x0.5x5mm ph oh ms) to attach hook onto holder arm.
The multifunctional PCB box uses guide plates and a set of snap-in jaws for easy assembly/disassembly without the need for screws. It also allows for DIN rail mounting or front panel mounting depending on configuration. Wiki page
To build this interface You will need some cheap element: One USB-C to TTL interface : https://pl.aliexpress.com/item/1005008104567290.html?spm=a2g0o.order_list.order_list_main.28.7daa1c24NlzL2N&gatewayAdapt=glo2pol Three 5,5 mm long pogo…
¡¡¡¡ ATENCION !!!! En este proyecto de manejan TENSIONES PELIGROSAS. Asegúrese de desconectar la tensión de red antes de cualquier manipulación. Asegurate de pones los cables de tierra en las bases de enchufes. Se declina cualquier…
Hand Grinder Burr Replacement Interface Replace most of hand grinder burr inside interface Made with PETG
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers. Note that in my case, the speakers were quite heavy for the original articulating mount design and are weighed down so they…
Keep your audio interface secure and organized with this sleek 3D-printed stand! Perfect for desks and studio setups, this stand is designed with functionality and style in mind. Features: Dimensions : 7.5cm x 8cm wide, with a 12° tilt…
Last update of this page was: 2026 04-07 These are the STL files for various 18v and 40v Ryobi battery interfaces. Other models I have listed on Printables may require one or more of these parts. Minimum of 14AWG wire is required for all…
Test model for a solution for a question on Reddit See: https://www.reddit.com/r/Fusion360/comments/1lodbxc/how_would_you_make_this_shape/
I modelled a simple holder for the Subaru DST-i diagnostic interface which I mounted to the side of one of my tool cabinets. It has 2 mounting holes which are 25mm between hole centres, and are 6mm in diameter. I'm not sure how many…
These models by themselves are nothing. These models are tools for you to use to create new spool attachments for your Qidi Plus 4. There are 3 models. (stl and f3d files provided for each) One is a male stub which is simple, just print…
For my self-made ESP ArtNetNode I have chosen the Hammond 1455J as a case. The PCB was designed to fit exactly into this case. In order to give access to the interfaces and to be able to mount antennas, I modified the bezels of both sides…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Original Part was pretty good design wise already. NO Supports required.
Complete video instructions in the .pdf file. It has better performance and a longer extension. Additionally it has been optimized for the Mark III, Mark IV and Com8 frames. This will fit in any tool bay in the Mark IV. See…
This project uses the Adafruit ESP32-S3 Reverse TFT board to create a switch interface that cycles through a list of keyboard shortcuts. The screen displays the currently active key and next on the list key. Two mono jacks are connected…
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
If you haven’t bought the stem mount, I designed a handlebar mount that fits the 22 mm diameter bar section where the original controller was mounted. The mount is fixed to the bar using two zip ties . I recommend adding a small piece of…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
This is a custom-designed interface plate for the Anycubic ACE Pro filament system. I created this "Extended" version to add a USB-C port to the rear of the unit, providing a clean solution for extra connectivity. It is the perfect mod…
This is a case to hold the microbit and 2 audio jacks to allow a user with a disability to plug in their preferred switches and send keyboard commands to a connected computer via bluetooth. Build instructions for a case free version is…
Interface to add the standalone Leap Motion module to a Pimax crystal or Crystal Light. You can use the screw holes in your Pimax case (for the Pimax integrated leap motion module), or tape it to the bottom. Two versions in the file,…
feet to be mounted on the interface, the other to be printed mirror-image
Remix of Pimax Dream Air Ancillary Gasket (MAX FOV) to be able to fit a mid strap from a VIVE DAS strap.
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
These water vapor spraying machines are great for gardening, however the part that connect the water reservoir (bottle) to the machine has a design flaw that allows you to overtighten the bottle and crack the plastic. Since the machine…
Hi! Because I got much more quality from my Sennheiser MKE600 than any other shoe mic - I've decided to upgrade my NX80 with the self made adapter. It should also work with other shotgun models, and for sure with all audio interface's…
Designers: use this object as a Negative Volume in PrusaSlicer to add a knob-to-rotary-encoder interface to your design. After messing around with custom knobs for several years, my favorite (and the best-fitting one I've found) is the…
Big Evangelion fan here, both of the original and the rebuild, and these have been on my list to make for a while despite others existing elsewhere. Hair Bands Please choose a hairband from the Cosplay Hairband System (CHS) page to…
Big Evangelion fan here, both of the original and the rebuild, and these have been on my list to make for a while despite others existing elsewhere. Hair Bands Please choose a hairband from the Cosplay Hairband System (CHS) page to…
Big Evangelion fan here, both of the original and the rebuild, and these have been on my list to make for a while despite others existing elsewhere. Hair Bands Please choose a hairband from the Cosplay Hairband System (CHS) page to…
3 Piece assembly for the Masta Blasta ™ by Rabbit Labs . Requires 28mmx7.5mm High Power Led optical lens , picked up on aliXpress. Also requires ( 2pcs) M3x35mm screws and nuts . Files marked with s are for Flippers with Silicone…
Adapter zur Anbringung des Loxone Zählerinterface IR Air an eZB Zahler DD3
Printed in ASA 0,15mm layer. glue body and ESP mini together. YAML and ESP info can be found here : https://github.com/SysAdminDk/EspHome/tree/main/IR%20-%20Heating%20Meter%20Reader IR eye ( remove back cover to fit)…
This is a replacement for the stock facial interface for the Quest 3 that works like the one on the Q-Pro. I use it with the Meta Quest Elite Strap, and I also use a chinstrap. For more info on the chinstrap see my chinstrap cup project.…
Plastic part of the Quest 2 facial interface. You can Glue in some foam padding or Velcro to have detachable padding. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Any…
While trying out Sony hot shoe covers for my A6700, I wanted to test out making them out of some of the Proto Pasta Copperfill PLA that I had on hand, and then sanding it smooth to bring out as much of the copper shine as possible as an…
This is a tight-fitting case for the wonderful Glasgow Interface Explorer. Designed to be as small as possible, and easy to print/assemble, so no light pipes for LEDs. There are several versions to choose from. All the cool kids use the…
This is a 2 parts interface for the Omron Adept6-Axes Robot Arm and the Schunk Gripper device. It was printed in Polycarbonate PC-MAX. Print instructions Standard Slic3r PC-MAX setting, BuildTak sheet ove MK2S PEI bed. Use gluestick as…
This lets you connect camera accessories, lighting, mic's etc to a multiboard rig. This adapter is a dual-interface model that that can attach to a multiboard using its snap interface, or the push-fit interface. This gives you the…
An adapter for the RaspberryPi 4 that is compatible with the following files: Ender 3 V3 SE Cable Holder Raspberry Pi 3/4 B+ Case Reason for the remix: The original cable holder project had linked to an RPi3 model which doesn't share the…
Based on the original 3d model provided by Meta, found here: https://developers.meta.com/horizon/downloads/package/accessories-guidelines/ This expands the sides with accommodation for glasses frames. Definitely not that comfortable…
These are designed to slip over PVC tubing when making vacuum chucks. The Fusion360 file is provided and it is parametric, so changing the centerdiameter will modify the overall size. 3MF contains various common sizes.
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers. Note that in my case, the speakers were quite heavy for the original articulating mount design and are weighed down so they…
Keep your audio interface secure and organized with this sleek 3D-printed stand! Perfect for desks and studio setups, this stand is designed with functionality and style in mind. Features: Dimensions : 7.5cm x 8cm wide, with a 12° tilt…
To reduce the altitude bearing stiction of my Hadley telescope, I created these bearing rings that use PTFE tubes as an interface material. The reduced stiction will require a well balanced telescope and possibly a spring to put more…
The interface supports consist of the corner and side supports of the MLP that are attached to piers used to anchor the MLP. In addition to the original Apollo MLP piers, the shuttle added additional piers that attach to the underside of…
Enlarged the square a bit and added recesses for the mounting pins on the back of my Logitech Z340 left and right speakers. Should also fit the Z640 speakers. Printed in PETG with 3 walls and 15% infill. Rest of the parts are from…
The Modular Wind Tunnel for STEM Education is distributed in the Printables Store and is therefore automatically licensed with a Standard Digital File license that, unfortunately, limits the community's ability to contribute to the…
A Lite Multirail interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer…
A Push-Fit interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height, 3…
These are fully 3D printable Garmin bike computer interfaces for all possible print orientations. Even the flexible tabs holding the Garmin in place are fully printable with print orientation taken into account. They can be fully…
These are fully 3D printable Wahoo bike computer interfaces for all possible print orientations. Even the flexible tabs holding the Wahoo in place are fully printable with print orientation taken into account. They can be fully integrated…
These are fully 3D printable SP connect bike phone mount interfaces. The files are available as .step file so that you can use them in your designs. Provided are the old SPC style interface and the new SPC+ interface. I have printed both…
For my Festool RTS 400 REQ which is for 130x 80mm² sanding paper, I bought a delta sanding pad , assuming that it would fit. I was wrong. The RTS 400REQ en DTS 400 REQ have a different base. I made an interface for the machine to mount…
Disney Bubble Wand screw on bottle interface. Cap - Bottle. For alle types. I printed in PLA. can be other types of plastics. The cross section of the original is to force air into the bottle. I cut out the original cylinder shape…
Baisc housing for a cheapo usb sound card, used to wire directly to an FT891 data jack. Includes strain relief and some clips. Prototype, some improvement pending. Original case attached for reference.
I needed to create a solution using my Logitech Z-5300 5.1 speakers on my desk, and I realized these do not exist. After some time and many iterations later, I present to you interfaces for a long discontinued Logitech Z-5300 speaker set.…
This is a case for the EMS with an ESP32 AZ-Delivery NodeMCU and board from BBQ Kees. This a amazing project can control your boiler, heatpumps with an EMS bus. The case is quick and dirtry, so you may need some hot glue to fix the ESP…
EN: Unified box for 4.3 inch display and interface board for JK-BMS. It is possible to edit the pack number in Bambu studio (1, 2, 3, etc. or anything else) the file is attached below. Ready for AMS. Happy printing! :-) I added a model of…
easy print no support needed i put 4 rubber feets under the stand which work really great print direction as in the picture hope you like it :)
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
Print with white or some other light or transparent filament so you can see activity LED working.
This is a 3D-printable adapter plate for attaching ducting to the Nutone HB80RL bathroom exhaust fan (or similar models). I used it to install custom ducting for a Craft Room ventilation system. The adapter includes: A circular outlet for…
To have an easy attachment to my DJ booth and the possibility to release/remove my self-made ESP ArtNetNode when needed I created this model. It was designed to fit the Hammond 1455J case which houses the ESP ArtNetNode. The case can be…
This is a simple Spinning Top . I made this model to test the multimaterial capabilities of a MMU or AMS. That means this model uses PLA for the model and PETG for the support interface. Print preparation: Make sure that your print bed is…
This is a little box for the WomoLIN interface V1.0 with Apfelsafft 's ESP32 HAT. There are not connector wholes for the HAT, as I did not use any of those. For those who needs those, use the attached F3D file.
Summary These interface blocks can be used as in insert in your printed object making a secure connection between it and the HSW grid. Where i already used these blocks: HSW sliding box collection by DennisP | Download free STL model |…
Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.
Just a basic interface part for coffee grinder ( hand cranked ) . Print in PETG / ABS / NYLON . use 20-25 % infill. Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter…
This assembly hangs on the fan protrusion on the back of the printer. Dimples are provided to place magnets in, but it doesn't really require them. I have about 10 feet of hose and use a 190CFM inline ventilator to pull the air out. The…
Features: New belt clip that allows for toolhead disassembly without taking belts off or having to re-tension after Tries to get toolhead as close to rail as possible for better center of gravity Featured in model: Dragon Burner Toolhead…
Features: New belt clip that allows for toolhead disassembly without taking belts off or having to re-tension after Tries to get toolhead as close to rail as possible for better center of gravity Featured in model: XOL Toolhead…
A case designed to be used with the interface board for the DB25 connector for DDCSV 3.1 CNC Controller. To make more user-friendly. It's made of the three parts, a top, bot and a spacer. There is a image explaining how to mount and what…
Last update of this page was: 2026 04-07 These are the STL files for various 18v and 40v Ryobi battery interfaces. Other models I have listed on Printables may require one or more of these parts. Minimum of 14AWG wire is required for all…
A quick and useful adapter to connect the original prusa PTFE fitting to a 3rd part Mini Heatsink replacement. Print settings: 0.1 DETAIL resolution 100% infill Material: PLA, PETG - (printed mine with good PLA)
Other parts: - Cloudray QBH Interface Connector (M30 x 0.75mm thread) - Thorlabs LCP01/M (or LCP34/M) and SM2RR
These interface files are STEP file provided by the designers at Worker. This would have saved us a lot of time with our ‘Puffin’ mod. Redesign your own front ends!
These adapters are made to fit the MeganeX Superlight 8K using the Modular Facial Interface developed by Akari, and adapt it to utilize Bigscreen Beyond style head straps. The source for the main interface is found at their site:…
I just threw this box together in Tinkercad. The height SHOULD be ok to fit a daughter board in, but without one in hand I just guessed. The lid snaps on to the bottom. The USB opening in the enclosure is approx 3mm from the bottom of the…
