Support Interface Material Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test using different support interface material with this model.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 156
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This is a simple model used to test support interface material combinations.
Set filament 1 as your main printing filament and filament 2 as your support interface filament.
For example, if I set filament 1 as PETG and filament 2 as PLA, the model will be printed in PETG. The support interface will be printed in PLA. Since PLA and PETG do not stick well together, it will create a cleaner interface upon support removal.
This model can be used to test other combinations as well such as ASA model + PETG interface.
Make sure to set the correct support interface on the support tab in Orca/Bambu Slicer.