1 / 11
Case for Energy Meter Optical Interface Reader
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved case for the optical read/write head for energy meters (smart meters) created by the "Volkszaehler" project.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 154
- Makes
- 2
- Views
- 1,005
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved case for the optical read/write head for energy meters (smart meters) developed by the "Volkszähler" project in Germany.
In addition to the printed parts you'll need:
- a ring shaped neodymium magnet, outer diameter 27mm, inner 16mm, 5mm strong
- a PCB as published on the "Volkszähler" project page
- a length of signal wire with 4 strands and and outer diameter of 4mm
- a small zip-tie
I created this design from scratch because the existing one didn't work for me at all, unfortunately.