Rotating TurnTable ESP32-WIFI-WEB interface (28cm diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a turn table which can be controlled with the phone in speed and direction.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 84
- Makes
- 0
- Views
- 1,172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
First of all: this is a remake of the amazing: https://www.thingiverse.com/thing:4817279
I first published it here: https://www.thingiverse.com/thing:4846512
I made the following changes:
- the table now is bigger : 28 cm of diameter
- I used an ESP32 with WIFI
- I made it an Access Point
- you can access via AP and change: direction and speed
- the switch is round
- it is all fully enclosed with 18650 batteries that can be extracted and changes
I know it is overkill using esp32, but it was there around doing nothing. the ESP has also a display which I am not using.
You can find also the *.ino file and the html.h one.
I am not very good in HTML5 and css so if you can get it better let me know that I will update it.
Print Settings
Printer used:
Creality CR-10
Rafts: No
Supports: No
Resolution: 200
Infill: 20
Filament brand: Generic
Filament color: brown and than partially painted black
Filament material: PLA
Notes:
You need a large plate for printing the top which is 28 cm of diameter.
at the same time it is important to have a flexible plate otherwise it will be very difficult to take it out given the large surface that touches the bed.
I suggest 4 perimeters, using for the external one 95% flow and lower speed, in this way you have an amazing smooth result.