Fluke Scopemeter optical interface mechanical adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the mechanical part of the optical PC interface connector for a Fluke Scopemeter. The original interfaces have…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 87
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is the mechanical part of the optical PC interface connector for a Fluke Scopemeter. The original interfaces have a special mechanical connector and are very expensive.
I couldn't find anyone who already had created this part or have published the exact dimensions of this connector. So i measured and designed the adapter myself and the needed electronics can be found in the internet for this do-it-yourself project. :)
Update 5.11.2017
I added a little bridge to avoid a twisted attachment of the connector.
Update 19.11.2017
I added the source Blender file.
Print Settings
Printer: Monoprice MD Mini Delta
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.3mm
Category: Electronics
Notes: I used PLA for this part which worked quite good.
How I Designed This
I used LibreCAD for creating the exact dimensions as DXF. After that i used Blender to import the DXF and model the 3D part. Then i exported it as STL and used slic3r to create the G-Code for my 3D printer.
Because the first printed part was a little bit to tight (maybe the print shrunk a bit) i exported the STL file with a factor of 1.03 and now it get a very good grip.