Fluke Scopemeter optical interface mechanical adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the mechanical part of the optical PC interface connector for a Fluke Scopemeter. The original interfaces have…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is the mechanical part of the optical PC interface connector for a Fluke Scopemeter. The original interfaces have a special mechanical connector and are very expensive.
I couldn't find anyone who already had created this part or have published the exact dimensions of this connector. So i measured and designed the adapter myself and the needed electronics can be found in the internet for this do-it-yourself project. :)
Update 5.11.2017
I added a little bridge to avoid a twisted attachment of the connector.
Update 19.11.2017
I added the source Blender file.
Print Settings
Printer: Monoprice MD Mini Delta
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.3mm
Category: Electronics
Notes: I used PLA for this part which worked quite good.
How I Designed This
I used LibreCAD for creating the exact dimensions as DXF. After that i used Blender to import the DXF and model the 3D part. Then i exported it as STL and used slic3r to create the G-Code for my 3D printer.
Because the first printed part was a little bit to tight (maybe the print shrunk a bit) i exported the STL file with a factor of 1.03 and now it get a very good grip.