1 / 3
Two-Piece Tape Wheel for Gridfinity Masking Tape Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changed center wheel section to print without folding.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
I didn't want to use the folded tape wheel design in the original so I made this version instead! The wheel can be printed flat on one side, and the axle can be press fit with a little effort. Optionally you can secure it with a little super glue.
Settings
Wheel:
At least 2 walls to ensure that the center doesn't crack when inserting the axle.
Axle:
Print with 10mm brim for stability. I printed it fully solid, but feel free to try different infill settings and post what works!
Can also use an 8mm x 34.5mm section of rod or dowel.